Category

List Products

PEEK O-rings or seals are often used together in high-temperature, high-pressure environments. The selection of O-rings or seals is particularly important in the oil and gas extraction industry, which is often subjected to severe working environments, because PEEK materials are resistant to high

Quick Info

Polymer Anti-Extrusion PEEK Back-Up Rings At high pressure, a softer seal gets pushed into the clearance gap and starts to tear. A PEEK back-up ring sits behind the seal and holds the line. DSP Sealing supplies anti-extrusion back-up rings in PEEK for hot, high-pressure service, includin

Quick Info

PEEK Plastic Retaining Seal Rings A retaining ring has one job: keep the seal where it was installed. If the ring swells, softens, or creeps, the seal moves. DSP Sealing supplies PEEK plastic retaining seal rings for machines that run hot and under high pressure, including oil and gas eq

Quick Info

Corrosion Resistant High Temperature PEEK Sealing Rings Hot, aggressive media wear out ordinary seal materials fast. DSP Sealing supplies PEEK sealing rings for machines that run hot and under high pressure, including oil and gas equipment. PEEK is chosen for this duty because it handles

Quick Info

Custom Black PCB Spacers and Washers in PEEK, POM, and Nylon A spacer under a circuit board must maintain a fixed gap without becoming part of the circuit. DSP Sealing makes custom black PCB spacers and washers in PEEK, with POM and nylon options, to your drawing. Black Does Not

Quick Info

PEEK Seat Seal Rings A valve seat takes a hit every time the valve closes, and it still has to seal afterward. DSP Sealing supplies PEEK seat seal rings for equipment that runs hot and under high pressure, including oil and gas, where softer seat materials wear out or deform. Why

Quick Info

PEEK Ring Manufacturer for High-Temperature Sealing

DSP Sealing is a PEEK ring manufacturer producing back-up rings, seal rings, seat rings, spacers, and washers from PEEK (polyether ether ketone) rod and tube stock. Rings are machined to your drawing and supplied in small trial batches or repeat production runs for oil and gas, automotive, aerospace, valve, and electronics applications.

Why Use PEEK for Sealing Rings?

PEEK is a semi-crystalline thermoplastic that keeps its strength and shape where many plastics soften or swell. Typical properties of unfilled PEEK:

  • Continuous service temperature of about 250°C
  • Tensile strength of roughly 90 to 100 MPa
  • Resistance to hydraulic fluids, steam, fuels, and many acids
  • Low moisture absorption, so ring dimensions stay stable
  • Low creep under constant load
  • Good wear resistance and inherent flame retardance

Exact values vary by grade and supplier, so we can confirm figures for your chosen grade on request.

PEEK Ring Types We Machine

  • Stop soft seals from extruding into the clearance gap under pressure
  • Hold pressure in high-temperature joints and fittings
  • Give a tight shut-off in valve bodies
  • Keep seals and components in position
  • Separate and insulate parts in electronic assemblies

How Does a PEEK Back-Up Ring Protect a Seal?

Under high pressure, an elastomer O-ring can be forced into the gap between mating parts. Repeated cycles nibble the seal edge and eventually cause a leak. A PEEK back-up ring sits on the low-pressure side of the seal. Because it is rigid, it closes the gap and supports the seal, so the O-ring keeps its shape for longer.

Where Are PEEK Rings Used?

Oil and gas: downhole tools, valves, and pumps exposed to heat, pressure, and sour (H₂S) media

Automotive: components near hot fluids and moving parts

Aerospace: assemblies where low weight and dependable sealing both matter

Valves: seat rings for tight shut-off

Electronics: insulating spacers and washers

How Are PEEK Rings Machined?

PEEK builds heat quickly when cut, and thin walls can warp. We turn rings on CNC lathes with sharp tooling, controlled feed rates, and steady coolant flow. Where a part needs it, we anneal to relieve internal stress. Sealing faces are finished smooth, and rings are checked against your drawing before shipment. Tolerances are agreed per drawing and available on request.

PEEK Grades and Sizes

Grade Best For
Unfilled PEEK Toughness and chemical resistance
Glass-filled PEEK Stiffness and dimensional stability
Carbon-filled PEEK Strength and wear resistance

We cut inner diameter, outer diameter and cross-section to your drawing, including custom profiles. Minimum order quantity is flexible and confirmed with your quote.

How to Choose the Right PEEK Ring

Check four things before ordering:

  1. Operating temperature and pressure
  2. The media the ring will touch
  3. Groove dimensions
  4. The mating seal material

Send us these details with your drawing, and we will recommend a grade and profile.

Quality and Certifications

Material certificates and inspection reports are available on request.

FAQs

Where can I buy PEEK rings in bulk?

DSP Sealing supplies standard and custom PEEK rings for industrial buyers, OEMs, and distributors. Send a drawing or size list for a quote.

What should I compare when choosing a PEEK ring supplier?

Compare material grade and traceability, tolerances the supplier will commit to, lead time, and whether they can machine to your drawing. Ask for samples before placing a larger order.

Do you provide samples?

Yes. Sample availability, cost, and lead time are confirmed when you send your requirements.

Can you make PEEK rings to a custom size or profile?

Yes. Send a drawing or sketch with dimensions and the application details.

Send your drawing for a quote