New
Available
  • 918

PTFE Backup Ring And Teflon Washer Used For Static Sealing

PTFE Backup Ring and Teflon Washer for Static Sealing Static joints still fail. The seal creeps under clamp load, or the media attacks the material over months of service. DSP Sealing machines PTFE backup rings and Teflon washers for flanges, fittings, valve bodies, and housings where nothing moves but the joint still has to hold. Where These Parts Are Used Our PTFE rings and discs are used in semiconductor, chemical, automotive, and food processing equipment. A backu

  • Color: Default Color
  • Size: Default Size
  • Origin: China
  • Usage: Default Usage
  • Type: Default Type
  • Efficiency: 99.9% Type

Description:

PTFE Backup Ring and Teflon Washer for Static Sealing

Static joints still fail. The seal creeps under clamp load, or the media attacks the material over months of service. DSP Sealing machines PTFE backup rings and Teflon washers for flanges, fittings, valve bodies, and housings where nothing moves but the joint still has to hold.

Where These Parts Are Used

Our PTFE rings and discs are used in semiconductor, chemical, automotive, and food processing equipment. A backup ring supports the primary seal and limits extrusion into the clearance gap. A flat washer or disc serves as a spacer or a static sealing face. Please tell us the part's role, and we will confirm the profile with you.

How We Make Them

PTFE powder is pressed into a preform at room temperature under high pressure, then sintered in an oven until solid. We machine finished rings and washers to the dimensions on your drawing.

Filler Options

Plain PTFE is not always the right answer. We can add fillers to suit the duty:

  • Glass fiber (5 to 25%): better strength in both hot and cold service, and resistance to most chemicals except very strong ones such as hydrofluoric acid.
  • Carbon fiber (10 to 35%): a harder material that copes better with heat, with enough conductivity to help prevent static build-up.
  • Graphite (5 to 25%): lower friction and good load capacity at speed, often blended with other fillers.
  • Bronze (40 to 80%): handles heat and pressure in hydraulic systems and sliding parts. It conducts electricity, so it is not for insulating duty, and some chemicals can damage it.

What to Include in Your Inquiry

Send the inner and outer diameter, thickness, filler preference, media, working temperature and pressure, and the quantity you need. MOQ and tolerances are confirmed per order.

Request a Quote

Email your drawing or sample dimensions to rita@dspsealing.com or call +86 13177896837. We will reply with material advice and a quotation.